07-01782F F479
1
Dri-Eaz Products, Inc.
Owner’s Manual
HVE3000 Flood Pumper and Inline Booster
The high-efficiency HVE3000 can be used both as a flood pumper to quickly remove excess
liquid water for flood remediation and as an inline truckmount booster to extend the
effective vacuum hose length for carpet extraction and cleaning.
Patents:
http://www.LBpatents.com
R E A D A N D S A V E T H E S E I N S T R U C T I O N S
SAFETY INSTRUCTIONS
WARNING! Do not alter or modify your HVE3000 in
any way. Use only replacement parts authorized by
Dri-Eaz Products, Inc. Modifications or use of
unapproved parts could create a hazard and will
void your warranty. Contact your authorized Dri-Eaz
distributor for assistance.
WARNING! Electric shock hazard, vacuum impeller,
and hot surface hazards.
Do not leave appliance when plugged in. Unplug from
outlet when not in use and before servicing.
Do not allow to be used as a toy. Close attention is
necessary when used by or near children.
Do not pull or carry by cord, use a cord as a handle,
close a door on a cord, or pull a cord around sharp
edges or corners. Do not run appliance over cords. Keep
cords away from heated surfaces.
Do not unplug by pulling on cord. To unplug, grasp the
plug, not the cord.
DRI-EAZ PRODUCTS, INC.
F479
15180 Josh Wilson Road
Burlington, WA 98233
www.dri
-
eaz.com
Phone: 800-932-3030
WARNING
To protect your valuable equipment and prevent voiding the warranty, read and follow these
instructions:
1. HEPA Filter Use and Foam Control
Install HEPA filter when HVE 3000 is used on Category 3 restoration jobs or where quieter operation
is preferred
Remove and discard filter at the end of all Category 3 restoration jobs
Replace the HEPA filter if it gets wet during operation
On all other jobs, we recommend operating the unit without the HEPA filter in place. Hearing
protection is recommended when the filter is not in place
Use defoaming chemicals whenever foam is present in the waste tank
If foam/water is pulled through the vacuum blowers, remove hose/wand and run blower unit for 5
minutes to dry out the system prior to storing
Failure to follow these instructions can damage the vacuum system and will void the warranty
2. Maintenance
Replace vacuum blower brushes after 800 hours of operation.
Detailed ins
tructions for these procedures are described in your owner’s manual. Copies of the
owner’s manual are available for download at the HVE 3000.DriEaz.com.