Wireless Light Control StarterKit
Quick Start Guide
dresden elektronik ingenieurtechnik gmbh
Phone: +49 351 31850-0 Fax: -10
Contact
Enno-Heidebroek-Str. 12
01237 Dresden | Germany
www.dresden-elektronik.de
© 2014 dresden elektronik ingenieurtechnik gmbh. All rights reserved. Other registered trademarks or terms and product names
are the property of their respective owners. All information contained herein is subject to change without notice. No liability can
be accepted or guarantee made for the information provided being up to date, correct and complete.
Update Gateway Software
To benefit from the ongoing development of the control application you can activate the automatic
detection of updates here as well: (under
‘Settings | System’ set the checkmark at ‘Allow gateway
discovery and checking for updates via internet
’).
The installation of an update is only run after an explicit acceptance. The update procedure may last
some minutes dependent on the Internet connection and size of the update. Reload the website via
the browser until the completion is displayed by an incremented version number in the user interface.
Expert Settings
Via the
‘General’ tab of the system menu you can change the name of your gateway, you can
determine a user defined password under
‘Account’ and unlock the gateway temporary for searching
by third-party apps under
‘Apps’ with the button ‘unlock’.
Notes
1. Each light can be a member of up to 8 groups.
2. In the user interface any number of groups can be created with each up to 16 scenes.
3. A scene always describes the status of the complete group, i.e. changing the scene affects all
lights.
4. If a light is switched off and on again physically, its last settings are restored. If settings per user
interface have been changed meanwhile they are ineffective after switching on again.
5. Not existing lights are displayed grayed out / semi-transparent in the user interface.
6. Lights can only belong to one network but to several groups; they rejoin it automatically after
switching on again. If a light shall be assigned to a new network it must be reset to factory settings
first.
7. For optimum accessibility of your lights we recommend that the gateway is powered on
permanently. After reboot the website may have to be loaded again.
Please also note the
Frequently Asked Questions
which can be found on our website:
http://www.dresden-elektronik.de/funktechnik/service/support/faq/wireless-light-control/?L=1
