16
Assembly Instructions for pet nail grooming
30
. Release sleeve
30
. Sanding disc
32
should lock in place (Fig. 5).
Incorrect seating of
s a n d i n g
d i s c
o n
mandrel may lead to personal injury or
property damage.
To check for proper
seating, hold shaft lock button
7
and
twist the sanding disc
32
. The sanding
disc
32
will not be able to rotate on
mandrel.
▶ To unload sanding disc:
A.
Pull spring-loaded sleeve
30
DOWN
toward tool with one hand (Fig. 5).
B.
Hold sleeve
30
down while twisting
sanding disc
32
90 degrees (Fig. 5).
C.
Remove sanding disc
32
(Fig. 5).
▶ To attach nail guard
attachment:
Note:
Make sure that the mandrel and
the sanding disc are mounted properly
before mounting the attachment.
A.
Detach the clear cap
21
from the
attachment by running the small
knobs
25
on the inside of the clear
cap up along the height adjustment
guide
26
until they reach the guided
opening (Fig. 6).
B.
Unlock the clasp
22
.
C.
Open the attachment
20
(Fig. 6).
D.
Position the attachment
20
around
the threaded nose of the tool
12
and
close the attachment together until
the clasp
22
is fully engaged (Fig. 7).
E.
Turn the whole attachment
20
clockwise to screw it into place on
the threaded nose
12
. Make sure that
it is securely tightened so that it will
not shift positions during use (Fig. 7).
F.
Re-attach the clear cap
21
(simply
perform step
A
in reverse order).
G.
Turn the clear cap so that the small
knobs are all the way to the end of
slot
26
(next to number “3”) on the
attachment. You will hear the cap
click into place when fully installed.
Do not force the clear cap out of the
guides (Fig. 6).
Note:
Refer to the AT01-PGA manual on
t h e D r e m e l w e b s i t e f o r a d d i t i o n a l
i n f o r m a t i o n r e g a r d i n g a t t a c h m e n t
compatibility.
B
C
A
21
26
25
20
22
Fig. 6
D
E
12
22
20
Fig. 7
1600A01P55.qxp_7760-PGK 4/15/19 9:56 AM Page 16
