that it does not cut as fast as you feel it should. Each cutter on your
chain has a depth gauge just ahead of the cutting edge that determines
how big a bite it can take. To check for proper depth of the cut, lay a
metal straight edge across the tops of the cutting edges
A
g
, and check
the dimension indicated. This dimension should be approximately
equal to the thickness of the gauge. If it is not, grind the chain depth
gauge until the clearance is approximately equal to the thickness of the
sharpening kit gauge. Be careful to maintain its shape. Do not remove
more material. Keep this depth gauge setting uniform on all cutter teeth
to make straight cuts.
SERVICE AND WARRANTY
This DREMEL product is guaranteed in accordance with statutory/ country-
specific regulations; damage due to normal wear and tear, overload or
improper handling will be excluded from the guarantee. In case of a
complaint, send the tool undismantled together with proof of purchase to
your dealer.
CONTACT DREMEL
For more information on the Dremel assortment, support and hotline, go to
www.dremeleurope.com
DE
VERWENDETE SYMBOLE
1
ANWEISUNGEN LESEN
2
GEHÖRSCHUTZ TRAGEN
3
AUGENSCHUTZ TRAGEN
4
STAUBMASKE TRAGEN
5
ELEKTROGERÄTE NICHT MIT DEM HAUSMÜLL ENTSORGEN
!
WARNUNG
LESEN SIE ALLE WARNHINWEISE UND ALLE
ANWEISUNGEN
7
