Supplement operating manual for DREHMO i-Matic actuators with integrated
MODBUS fieldbus interface
Wenden, 21.03.12
Page 11 of 18
Prepared by: Ste
0.1seconds in the range from 1 to 255 (0.1 to 25.5 seconds). In case of fail-safe the
actuator action can be parameterised as explained in the i-Matic instruction manual.
2.4.5 Fault messages
Fault messages can be reset depending on the active fault by :
- a movement command in opposite direction in case of a torque fault
- a new movement command in case of direction monitoring
- directly if the fault is no longer existing in all other cases
