© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
INLINE PANEL - Style C shower panel manual Ver 1 Rev 1 07/2018
8
©2018 DreamLine. All Rights Reserved
If possible, allow the silicone
to cure before handling the
assembled panel.
!
ATTENTION:
Please note that the bottom hole
in the corner of the Panel Glass must be opposite
from the Glass Profile.
NOTE:
If the Glass Profile fit is too tight over the
Panel Glass, use a rubber mallet and a piece of wood
to gently tap on the glass profile. Never use a metal
hammer or hit the profile without a wood bumper.
Fig 2
!
1
2
3
4
!
flush
with
glas
s
If necessary, use a
rubber mallet to tap
on the glass profile
hole for bottom
bracket
Glass Profile
Wall Profile
Glass Profile
P
ANEL
G
LAS
S
P
ANEL
G
LAS
S
P
ANEL
G
LAS
S
2.
Apply clear silicone into the entire length of the channel in the
Glass Profile (#10)
and attach it to the
edge of the
Panel Glass (#11)
. Make sure the
Glass Profile (#10)
is flush with the top and bottom of the
Panel Glass (#11).
Insert the
Panel Glass (#11)
with the attached
Glass Profile (#10)
into the
Wall Profile (#09)
.
(Fig 2)