© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
Installation Steps
Tools Needed
Parts Needed
12
UNIDOOR (STYLE A) Single Shower Door Manual Ver 3 Rev 2 122021
©2021 Dr
eamLine® A
ll R
igh
ts R
eser
ved
TIP
Clean the
Hinge gaskets
and the glass around the hinge notch with
an alcohol swab or glass cleaner prior to attaching the
Hinge
Assemblies (#05)
to the
Door Glass (#01)
.
!
Never set glass down directly onto a tile or concrete floor surface.
Always use a piece of wood or cardboard and leave the corner
protectors and shims on the glass until it becomes necessary to
remove them. Always
protect the bottom edge and corners of the
glass from damage which could lead to breakage and/or serious
personal injury.
Fig 1
outside
outside
NOTE
left-swing installation shown
Fully and evenly tighten the hinge
bolts by hand. It is normal to hear
the gaskets compress onto the
glass.
05
01
x1
x2
!
Install the hinges
centered in the cutout
and flush with the edge
of the Door Glass
The door glass can be
flipped for left or right
swing installation.
However, the ClearMax
label must be on the inside.
The Adjustable Hinge Assemblies are factory pre-set to
overclose to 85° to create a tight seal with the Strike
Vinyl. See Page 21 for Hinge Adjustment details after
installation.
Leave corner
protectors on the
glass until it is
necessary to
remove them!
!
1