Dreame T20 Pro, User Manual, Page: 15 / 250

13
EN EN
How to Use
Working Methods
Method 1: Discontinuous Cleaning Mode
Press and hold the on/off switch to power it on, and release it to stop immediately.
Method 2: Continuous Cleaning Mode (Electronic Lock)
Click the electronic lock to switch to Continuous Cleaning Mode when the vacuum is
running. Then release the on/off switch to make the vacuum in Continuous Cleaning Mode.
Use the electronic lock to free your fingers and avoid finger fatigue caused by holding the
switch.
Note:
• In this mode, briefly press the on/off switch to suspend the operation or start again，
and the working mode of the vacuum will not change.
• Click the electronic lock again to quit the Continuous Cleaning Mode.
Continuous
Cleaning Mode
Select from two working methods for the vacuum, based on your needs.