Thank you for purchasing our Electric Blanket which has been
designed to give many years of service under normal use.
In order to get the most from your Electric Blanket please carefully
read and follow the instruction provided.
Specifications
Voltage: 220 - 240V~ 50Hz
Rated Power: 1 x 60W
FEBDS107-2 Size: 193 x 91 cm
Rated Power: 2 x 60W
FEBDD137-2 Size: 193 x 137 cm
FEBDK152-2 Size: 203 x 152 cm
FEBDSK182-2 Size: 203 x 182 cm
How to use
1. Your electric blanket should be placed directly onto the mattress
with the power lead near the edge of the pillow. If using a mattress
protector this goes over the electric blanket.
2. Ensure that the electric blanket is one to suit your mattress – i.e.
a King size electric blanket must be used on a King size mattress.
Do not use a Single Bed blanket on a Double, A King or a Super
King size mattress. Nor use a Double, a King or a Super King size
blanket on a Single bed mattress.
3. Its size is much as to give even all over warmth for the whole
bed surface. The blanket should not be tucked in at the sides.
4. When securely attached to the mattress, connect the plug to the
power point and switch on. The flexible cord and switch must be
kept outside the bed and away from open window or exposure to
moisture.
5. It is recommended that the cord switch is set to either position
“2” or “3” for 15 – 20 minutes before going to bed and then can be
turned down to setting “1” or off altogether depending on your own
requirements whilst in bed. Double, King and Super King have dual
control, which enables the users to set their sides of the bed to
their desired heat setting.
