3
4
Timer Display
Starting
Temperature
Condition
Room Temperature
Refrigerated
Frozen
C
1. Close the lid.
Press the Power Button.
Set warming time:
Press the Vessel/Volume/Units Button once or twice to choose the vessel material.
Note: Select Glass Bottle for food jar.
Use the Up or Down Arrow Button to choose a preset volume of liquid.
If your volume of liquid is not an option, select closest preset below your volume
and manually increase time in the next step.
Note: Select 150 mL (5 oz) for food jar.
To change between oz and mL, hold the button for three seconds.
Plastic Bottle
Glass Bottle
Vessel/Units
Volume Amount
4
7
5
6
A
B
Warming Time Chart
Times are pre-programmed for full bottles.
THIS TIME CHART IS APPROXIMATE. WARMING TIMES WILL VARY DEPENDING ON THE VESSEL MATERIAL,
SHAPE AND VOLUME. TEMPERED GLASS HAS BEEN TESTED FOR USE IN THIS WARMER.
CAUTION: NEVER FREEZE GLASS CONTAINERS, AS GLASS MAY BREAK.
WARMING
CAUTION: ALWAYS TEST CONTENT TEMPERATURE BEFORE FEEDING YOUR BABY.
1. Follow steps 1-3 in Preparing for Use section.
2. Ensure warming basket and lift-out basket are in warming chamber. Never use without
baskets in place.
3. Place item into warmer as outlined below.
BOTTLE: Remove bottle components and add storage cap
for leak-free warming. Place into warming basket.
FOOD JAR:
Loosen lid of food jar. Place into lift-out basket,
then lower into warming basket.
Note: This warmer should only be used with plastic and glass bottles and glass food jars.
It is not designed to heat or thaw plastic food tubs, food pouches or breast milk storage bags.
Press the Starting Temperature Condition Button until the temperature
condition of the vessel appears.
Manual Time Adjustment: In Starting Temperature Condition mode, use
Up or Down Arrow Button to increase or decrease time.
Note: The last used warming time is remembered for your next use.
1
2
3
Press the Cycle Start Button.
WARNING: DO NOT open lid or reach over the appliance while in use,
as steam will cause burns and serious injuries. DO NOT touch hot
surfaces, including lid and interior parts, during use.
150 mL / 5 oz
2:45
4:00
Wide-Neck
Narrow
270 mL / 9 oz
3:30
5:00
325 mL / 11 oz
3:45
6:00
12:15
15:00
17:00
60 mL / 2 oz
2:00
3:00
120 mL / 4 oz
2:30
3:45
250 mL / 8 oz
2:45
4:30
8:45
10:15
13:30
DR. BROWN’S PLASTIC BOTTLE
VESSEL/VOLUME
STARTING TEMPERATURE CONDITION
150 mL / 5 oz
2:15
3:45
Wide-Neck
Narrow
270 mL / 9 oz
2:45
4:15
X
X
120 mL / 4 oz
1:45
3:30
250 mL / 8 oz
2:30
4:00
X
X
DR. BROWN’S GLASS BOTTLE
VESSEL/VOLUME
STARTING TEMPERATURE CONDITION
(22°
C/
72°F
)
(4°
C/
39°F
)
(-17°
C/
0°F
)
(22°
C/
72°F
)
(4°
C/
39°F
)
(-17°
C/
0°F
)
(22°
C/
72°F
)
(4°
C/
39°F
)
(-17°
C/
0°F
)
113 g / 4 oz
2:15
3:45
X
FOOD JAR
*
VESSEL/VOLUME
STARTING TEMPERATURE CONDITION
*For shortcut to food jar times, use Glass Bottle 150 mL / 5 oz preset.
Power
Up
Cycle Start
Down
Starting
Temperature
Condition
Vessel/Volume/
Units Selection
