Draytek VigorAP 810 User Manual Download

Page: 62 / 134

VigorAP 810 User’s Guide

Wireless LAN Settings for Station-Infrastructure Mode

When you choose

Station-Infrastructure

as the operation mode, the Wireless LAN menu

items will include General Setup, Site Survey, Statistics and WPS.

By clicking the

General Setup

, a new web page will appear so that you could configure the

wireless profile and choose proper mode. Please refer to the following figure for more
information.

Available settings are explained as follows:

Item Description

Enable Wireless LAN

Check the box to enable wireless function.

Mode

At present, VigorAP 810 can connect to 11 b only, 11 g only,  11
n only, Mixed (11b+11g), Mixed (11b+11g+11n) and  Mixed
(11g+11n) stations simultaneously. Simply choose  Mixed
(11b+11g+11n) mode.

Add

Click this button to add new wireless profiles.

Delete

Click this button to delete the selected wireless profile.

Edit

Click this button to modify the existing wireless profile.

Connect

Click this button to connect the wireless station to AP with the
selected profile.

Packet-OVERDRIVE

This feature can enhance the performance in data transmission

Summary of Contents for VigorAP 810







































































































































Search results

Summary of Contents for VigorAP 810

Reviews:

Related manuals for VigorAP 810

Brands by name

Popular brands

Draytek VigorAP 810, User Manual

Search results

Summary of Contents for VigorAP 810

Reviews:

Related manuals for VigorAP 810

Brands by name

Popular brands