2.7 Console Port Connection
The default setting of the console port is “
baud rate 9600, no parity, and 8 bit with 1
stop bit (N81)
”.
For the initial configuration, users need to use terminal emulator software on a computer
and connect it to a network module through the console port. Users can connect the RJ-45
end of the console cable to the console port of the network module. On the other side,
users can connect the other end to a serial port (RS232) of a computer.
Beware that the default login is “
admin
”, password is “
1234
”.
***********************************************************
*
Bootloader Version: V1.XX
*
***********************************************************
Press [ENTER] key within 5 sec. to download image...0
Please wait a minute...
Login:
User’s Guide
26
Summary of Contents for VigorAccess-A48M-2-SFP-A-1-AC
Page 1: ...i ...
Page 2: ...User s Guide ii ...
