2.4.4 Scenario
– A24M and Six A48 Devices
The following picture shows the sample connection between six A48 devices and one
A24M device. Here we take PC-1, PC-2 and PC-3 as the examples that connecting to one
A48 directly and wanting to access the Internet through A24M device.
In the above picture, the user of PC-3 wants to use phone and access the Internet at the
same time; yet PC-1 and PC-2 just want to access the Internet through the connected
Slave and Master devices. As for the connection, please follow the steps below:
1.
2.
3.
4.
5.
6.
Connect PC-3 to number
9
of MDF-1, PC-2 to number
5
of MDF-1 and PC-1 to
number
1
of MDF-1 with Ethernet cable).
Connect the MDF-1 to
Line
port of the
Slave Device -1
.
Connect the
Phone
port of the
Slave Device-1
to the matching connector (in this case,
it is number
9
, be careful and not to misconnect) to MDF-2 which will be connected
to PSTN. This step is just useful for PC-3 for the user wants to call out through the
Slave Device-1
.
Connect
G1
or
G2
port of the
Slave Device-1
and
G6
port of the Master device with
Ethernet cable. As to the connection among the Master device and
Slave Device-2
to
Slave Device-6
, please refer to arrow indication shown on the picture.
Connect the Master device and ISP with Fiber cable through
G3
or
G4
port.
With such connection, all the users of the PCs (connecting to the Slave devices) can
access the Internet through
G3
or
G4
connector of the Master device. Yet only PC-3
can call out with a telephone set directly.
Such connection allows 168 ADSL CPE routers (24 from the Master device and 144 from
the
Slave Device-1
to
Slave Device-6
) to connect to outside Internet via the Master device
at one time.
User’s Guide
18
Summary of Contents for VigorAccess-A48M-2-SFP-A-1-AC
Page 1: ...i ...
Page 2: ...User s Guide ii ...
