Vigor2820 Series User’s Guide
40
would like to utilize them on the WAN interface, please use
WAN IP Alias. You can set up to 8 public IP addresses other than
the current one you are using. Notice that this setting is available
for WAN1 only. Type the additional WAN IP address and check
the Enable box. Then click OK to exit the dialog.
Fixed IP
– Click
Yes
to use this function and type in a fixed IP
address in the box of
Fixed IP Address
.
Default MAC Address
– You can use
Default MAC Address
or
specify another MAC address by typing on the boxes of MAC
Address for the router.
Specify a MAC Address –
Type the MAC address for the router
manually.
Index (1-15) in Schedule Setup -
You can type in four sets of time
schedule for your request. All the schedules can be set previously
in
Applications – Schedule
web page and you can use the number
that you have set in that web page.
After finishing all the settings here, please click
OK
to activate them.
M
M
P
P
o
o
A
A
f
f
o
o
r
r
W
W
A
A
N
N
1
1
MPoA is a specification that enables ATM services to be integrated with existing LANs,
which use either Ethernet, token-ring or TCP/IP protocols. The goal of MPoA is to allow
different LANs to send packets to each other via an ATM backbone.
To use
MPoA
as the accessing protocol of the Internet, select
MPoA
mode. The following
web page will appear.
Summary of Contents for VIGOR2820 series
