manualshive.com logo in svg

Draytek VIGOR2820 series, User Manual, Page: 168 / 269

Share
Download
Draytek VIGOR2820 series User Manual Download Page 168

 

Vigor2820 Series User’s Guide

 

160

Domain/Realm 

Display the domain name or IP address of the SIP registrar 
server.

 

Proxy 

Display the domain name or IP address of the SIP proxy 
server. 

Account Name 

Display the account name of SIP address before @. 

Ring Port 

Specify which port will ring when receiving a phone call. Set 
Phone, ISDN1-S0 or ISDN-TE as the default ring port for the 
SIP account. If you choose Phone or ISDN1-S0, the 
ISDN2-TE selection will be dimmed, vice versa. There are ten 
internal lines with numbers (30 – 39) offered for 

ISDN-S0

.

 

You can specify any one of them as ring port for specified SIP 
account. By the way, ISDN-S0 can be used by mapping with 
MSN numbers.   

STUN Server

 

Type in the IP address or domain of the STUN server. 

External IP

 

Type in the gateway IP address. 

SIP PING interval

 

The default value is 150 (sec). It is useful for a Nortel server 
NAT Traversal Support. 

Status 

Show the status for the corresponding SIP account. 

R 

means 

such account is registered on SIP server successfully. 

–

 means 

the account is failed to register on SIP server. 

 

Profile Name 

Assign a name for this profile for identifying. You can type 
similar name with the domain. For example, if the domain 
name is 

draytel.org

, then you might set 

draytel-1

 in this field. 

Register via 

If you want to make VoIP call without register personal 
information, please choose 

None

 and check the box to achieve 

the goal.

 

Some SIP server allows user to use VoIP function 

without registering. For such server, please check the box of 

Summary of Contents for VIGOR2820 series














































































































































































































































































Reviews:

No comments