Vigor2100 Series User’s Guide
39
refer to the following page.
Active
Enable or disable the filter rule.
Comment
Enter filter set comments/description. Maximum length is
23–character long
Next Filter Set
Set the link to the next filter set to be executed after the current filter
run. Do not make a loop with many filter sets.
To edit
Filter Rule
, click the
Filter Rule
index button to enter the Filter Rule setup page.
Comments
Enter filter set comments/description. Maximum length is 14-
character long.
Check to enable the
Filter Rule
Check this box to enable the filter rule.
Pass or Block
Specifies the action to be taken when packets match the rule.
Pass Immediately -
Packets matching the rule will be passed
immediately.
Block Immediately -
Packets matching the rule will be dropped
immediately.
Pass If No Further Match -
A packet matching the rule, and that
does not match further rules, will be passed through.
Block If No Further Match -
A packet matching the rule, and that
does not match further rules, will be dropped.
