VigorSwitch P2261 User’s Guide
87
Parameters description:
VLAN ID
The VLAN ID of the entry.
Snooping Enabled
Enable the per-VLAN MLD Snooping. Only up to 64
VLANs can be selected.
MLD Querier
Enable the IGMP Querier in the VLAN.
RV
Robustness Variable. The Robustness Variable allows
tuning for the expected packet loss on a link. The allowed
range is 1 to 255, default robustness variable value is 2.
QI
Query Interval. The Query Interval variable denotes the
interval between General Queries sent by the Querier. The
allowed range is 1 to 255 seconds; default query interval is
125 seconds.
QRI
Query Response Interval. The Maximum Response Delay
used to calculate the Maximum Response Code inserted into
the periodic General Queries. The allowed range is 0 to
31744 in tenths of seconds; default query response interval
is 100 in tenths of seconds (10 seconds).
LLQI
Last Listener Query Interval. The Last Listener Query
Interval is the Maximum Response Delay used to calculate
the Maximum Response Code inserted into Multicast
Address Specific Queries sent in response to Version 1
Multicast Listener Done messages. It is also the Maximum
Response Delay used to calculate the Maximum Response
Code inserted into Multicast Address and Source Specific
Query messages. The allowed range is 0 to 31744 in tenths
of seconds; default last listener query interval is 10 in tenths
of seconds (1 second).
URI
Unsolicited Report Interval. The Unsolicited Report Interval
is the time between repetitions of a node's initial report of
interest in a multicast address. The allowed range is 0 to
31744 seconds; default unsolicited report interval is 1
second.
Refresh
The simple counts will be refreshed manually when user use
mouse to click on “Refresh” button.
After finished the above settings, click
Apply
to save the configuration. The settings will
take effect.