VigorSwitch P2261 User’s Guide
69
spanning trees for MSTI's (Intra-region). The name is at
most 32 characters.
Configuration Revision
The revision of the MSTI configuration named above. This
must be an integer between 0 and 65535.
MSTI Mapping
MSTI
The bridge instance.
The CIST is not available for explicit mapping, as it will
receive the VLANs not explicitly mapped.
VLANs Mapped
The list of VLANs mapped to the MSTI. The VLANs must
be separated with comma and/or space. A VLAN can only
be mapped to one MSTI. An unused MSTI should just be
left empty. (I.e. not having any VLANs
After finished the above settings, click
Apply
to save the configuration. The settings will
take effect.
2
2
.
.
3
3
.
.
7
7
S
S
p
p
a
a
n
n
n
n
i
i
n
n
g
g
T
T
r
r
e
e
e
e
–
–
M
M
S
S
T
T
I
I
P
P
r
r
i
i
o
o
r
r
i
i
t
t
i
i
e
e
s
s
When you implement a Spanning Tree protocol on the switch for the bridge instance, the
CIST is the default instance which is always active. For controls the bridge priority. Lower
numeric values have better priority. The bridge priority plus the MSTI instance number,
concatenated with the 6-byte MAC address of the switch forms a Bridge Identifier.
Function name:
Spanning Tree – MSTI Priorities
Function description:
The function is used to inspect the current STP MSTI bridge instance priority
configurations, and possibly change them as well.
Parameters description:
MSTI
The bridge instance.
The CIST is the default instance, which is always active.
Priority
Controls the bridge priority.
Lower numeric values have