VigorSwitch P2261 User’s Guide
68
the
error-disabled
state, and will be removed from the
active topology.
Port Error Recovery
Control whether a port in the
error-disabled
state
automatically will be enabled after a certain time. If
recovery is not enabled, ports have to be disabled and
re-enabled for normal STP operation. The condition is also
cleared by a system reboot.
Port Error Recovery
Timeout
The time to pass before a port in the
error-disabled
state can
be enabled. Valid values are between 30 and 86400 seconds
(24 hours).
After finished the above settings, click
Apply
to save the configuration. The settings will
take effect.
2
2
.
.
3
3
.
.
6
6
S
S
p
p
a
a
n
n
n
n
i
i
n
n
g
g
T
T
r
r
e
e
e
e
–
–
M
M
S
S
T
T
I
I
M
M
a
a
p
p
p
p
i
i
n
n
g
g
When you implement a Spanning Tree protocol on the switch that the bridge instance, the
CIST is not available for explicit mapping, as it will receive the VLANs not explicitly
mapped. Due to the reason that you need to set the list of VLANs mapped to the MSTI, the
VLANs must be separated with comma and/or space. A VLAN can only be mapped to one
MSTI. An unused MSTI should just be left empty (i.e., not having any VLANs mapped to
it).
Function name:
Spanning Tree – MSTI Mapping
Function description:
The function is used to inspect the current STP MSTI bridge instance priority
configurations, and possibly change them as well.
Parameters description:
Configuration Identification
Configuration Name
The name identifying the VLAN to MSTI mapping. Bridges
must share the name and revision (see below), as well as the
VLAN-to-MSTI mapping configuration in order to share