background image

- 21 -

- 4 -

3. WARRANTY

3.1 WARRANTY

Draper tools have been carefully tested and inspected before shipment and are guaranteed to be 
free from defective materials and workmanship.
Should the tool develop a fault, please return the complete tool to your nearest distributor or 
contact

Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF. England.
Telephone Sales Desk: (023) 8049 4333 or Product Help Line (023) 8049 4344.

A proof of purchase 

must

 be provided with the tool.

If upon inspection it is found that the fault occurring is due to defective materials or workmanship, 
repairs will be carried out free of charge. This warranty period covering labour is 12 months from 
the date of purchase except where tools are hired out when the warranty period is 90 days from 
the date of purchase. The warranty is extended to 24 months for parts only. This warranty does not 
apply to any consumable parts, any type of battery or normal wear and tear, nor does it cover any 
damage caused by misuse, careless or unsafe handling, alterations, accidents, or repairs 
attempted or made by any personnel other than the authorised Draper warranty repair agent.

Note:

 If the tool is found not to be within the terms of warranty, repairs and carriage charges will 

be quoted and made accordingly.
This warranty applies in lieu of any other warranty expressed or implied and variations of its terms 
are not authorised.
Your Draper warranty is not effective unless you can produce upon request a dated receipt or 
invoice to verify your proof of purchase within the warranty period.
Please note that this warranty is an additional benefit and does not affect your statutory rights.

Draper Tools Limited.

13.  DISPOSAL

Li-ion

13.1 DISPOSAL

–  At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is 

disposed of according to national regulations.

–  Contact your local authority for details of collection schemes in your area.
 In 

all 

circumstances:

 

  Do not dispose of power tools with domestic waste.

 

 Do not incinerate.

 

  Do not dispose of WEEE* as unsorted municipal waste.

*  Waste Electrical & Electronic Equipment.

13.2 BATTERY PACK DISPOSAL INFORMATION

Warning!

–  Do not put battery pack in fire or mutilate – cells may burst or release toxic materials.
–  Do not short circuit cells, may cause burns.
–  The battery pack must be removed from the appliance before it is scrapped.
–  The battery pack is to be disposed of safely.
–  Do not mutilate batteries, corrosive electrolyte will be released.
–  Do not dispose of batteries or cells in a charged condition.
Expired batteries must be recycled/disposed of in accordance with the appropriate regulation or 
legislation. They should be returned to your local warranty agent/stockist.

Summary of Contents for Storm Force 70453

























Reviews: