background image

4. INTRODUCTION

4.1 SCOPE

This hand-held cordless car polisher is intended for use on automotive bodywork, or for polishing 
applications on other suitable surfaces where a high-gloss finish is required. Do not attempt to use this 
product for sanding or grinding purposes as this could damage the motor, invalidating the warranty.
This product is intended for domestic and infrequent light trade use only. Any application other 
than that it was intended for, is considered misuse.

4.2 SPECIFICATION

Stock No. ....................................................................................................................................... 70453
Part No. ............................................................................................................................. CPO108SF/K
Disc diameter (backing pad)  ........................................................................................................  73mm
Speed (no load)  ..............................................................................................  0 – 2,500/0 – 7,500r/min
Shaft screw thread ..........................................................................................................................5/16"
Sound pressure level (LpA)*: ..................................................................................................78.6dB(A)
Sound power level (LWA)**:.................................................................................................... 89.6dB(A)
Uncertainty (K): ........................................................................................................................... 3dB(A)
Vibration Level .......................................................................................................................  4.213m/s2
Uncertainty (K): .......................................................................................................................... 1.5m/s2
Weight (nett) ................................................................................................................................. 0.67kg

Battery pack:
 Part 

No. ......................................................................................................................... CB108LI

 Type 

..................................................................................................................................  Li-ion

 Rated 

Voltage 

.................................................................................................................... 10.8V

 Rating 

...............................................................................................................................  1.5Ah

Charger:
 Part 

No. ................................................................................................................................ C108LI

 Rated 

Voltage .......................................................................................................................  230V~

 Rated 

Frequency ..................................................................................................................... 50Hz

 

Rated D.C. output voltage .....................................................................................................  10.8V

 

Rated D.C. output current  ........................................................................................................ 2.0A

 

Protective device rated current .................................................................................................... 2A

 Construction 

........................................................................................................................ Class II

*   Continuous A-Weighted Sound Pressure Level at the workstation in accordance to and declared  
 

according to EN60745.

**   The typical A-weighted noise level determined according to EN60745.

- 5 -

- 20 -

12. OPTIONAL ACCESSORIES

12.1 OPTIONAL ACCESSORIES

A full range of accessories are available from Draper Tools.
Please visit our website for details: 

www.drapertools.com

Summary of Contents for Storm Force 70453

























Reviews: