2. PROBLEM:
“Chatter” marks on work surface
(Fig.14).
REMEDY:
Check frog clamping screws.
Check lever cap pressure on iron.
Check seating of iron on frog face.
3. PROBLEM:
“Tram” lines or scoring marks on
work surface
(Fig.15).
REMEDY:
corners of iron too sharp should
be honed to a radius. Iron may be
hollow on edge. Iron may be
damaged, re-hone or re-grind.
Lateral adjustment poorly set.
4. PROBLEM:
Plane skids over surface.
REMEDY:
Iron may be dull and require sharpening. Clean base with solvent.
Check depth of cut.
Fig.14
Fig.15
Summary of Contents for P5
Page 2: ...COMPONENTS Fig 1 ...
