APPLICATION SMOOTHING PLANE:
For finishing, and general purpose work.
Lift lever cam
(17) (Fig.1)
and remove
lever cap
(16) (Fig.1)
. Remove the cap
iron and cutting iron
(8/9) (Fig.1)
and
place on bench. Slacken cap iron screw
(15) (Fig.1) (see Fig.2)
. Slide back cap,
turn and remove. Iron is now ready for
honing.
IMPORTANT:
IRON MUST BE
HONED BEFORE USE.
1. HONING THE IRON
The iron is supplied at a ground
angle of 25˚. Hone on a good
quality, flat oil stone lubricated
with light machine oil.
(a) Place ground 25˚ bevel flat on
oil stone and raise 5˚ to honing
angle of 30˚
(Fig.4)
.
(b) Hone the bevel along the stone,
until a burr is formed on the
back of the iron.
●
For easy honing of plane irons use
Draper HG1 honing guide
Stock No.12400.
HONING THE IRON
PREPARING THE IRON FOR
HONING
BENCH PLANE
Fig.2
Fig.3
Fig.4
Summary of Contents for P5
Page 2: ...COMPONENTS Fig 1 ...
