8
13
9. OPERATING INSTRUCTIONS
5. HEALTH & SAFETY INFORMATION
5.3 CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN.
Caution:
Risk of electric shock. Do not open.
This appliance is supplied with a moulded 3 pin mains plug for your safety. The value of the fuse fitted is
marked on the pin face of the plug. Should the fuse need replacing, ensure the substitute is of the
correct rating, approved to BS1362 and ASTA or BS Kite marked.
ASTA
BSI
The fuse cover is removable with a small plain slot screwdriver. Ensure the fuse cover is replaced before
attempting to connect the plug to an electrical outlet. If the cover is missing, a replacement must be
obtained or the plug replaced with a suitable type.
If a replacement plug is to be fitted this must be carried out by a qualified electrician.
The damaged or incomplete plug, when cut from the cable should be disabled to prevent connection to a
live electrical outlet.
This appliance is Class II
†
and is designed for connection to a power supply matching that detailed on
the rating label and compatible with the plug fitted.
If an extension lead is required, use an approved and compatible lead rated for this appliance. Follow all
the instruction supplied with the extension lead.
†
Double insulated : This product requires no earth connection as supplementary insulation is applied
to the basic insulation to protect against electric shock in the event of failure of the basic insulation.
Important:
On products exceeding 2000W it is recommended that the power cable and/or extension
cable are fully unwound before a connection is made to the power supply. However, ensure the residual
cable does not pose a trip hazard
WARNING:
Use of this product can pose a danger to wildlife. Before attempting to use this product
check the area, particularly long grass and under bushes, for signs of life and relocate if
necessary.
NOTE:
Not all animals will be deterred by the noise of the product alone.
Warning: The cutting head and line continue to rotate after the motor is switched off.
Always keep bystanders away.
Remove the plug from the socket before carrying out adjustment, servicing or maintenance.
WARNING:
Some of the contents of this grass trimmer have sharp edges.
The guard
contains the line length trimming blade
which is sharp!
1
FIG.9
2
9.1 ON/OFF TRIGGER SWITCH - FIG. 9
It is highly recommended that this
machine is used in conjunction with an
RCD (Residual current device).
Draper Stock
No.69307
