background image

14

7

9.   OPERATING INSTRUCTIONS

5.  HEALTH & SAFETY INFORMATION

5.2 ADDITIONAL SAFETY INSTRUCTIONS

WARNING:

 When using the machine the safety rules 

must be followed. For your own safety and that of 
bystanders please read these instructions before 
operating the machine. Please keep the instructions safe 
for later use.

1) Personal 

Safety

 

a) Wear protective glasses or goggles.

 

b) Never allow children or people unfamiliar with the 

instructions to use the machine. 

 

c)  Stop using the machine while people, especially 

children, or pets are nearby.

 

d) Only use the machine in daylight or good artificial 

light.

 

e) Before using the machine and after any impact, 

check for signs of wear or damage and repair as 
necessary.

 

f)  Never operate the machine with damaged guards 

or without the guards in place.

 

g) Keep hands and feet away from the cutting means 

at all times and especially on the motor. 

 

h) Take care against injury from any device fitted for 

trimming the filament line length. After extending 
new cutter line always return the machine to its 
normal operating position before switching on. 

 

i)  Never fit metal cutting elements.

 

j)  Never use replacement parts or accessories not 

provided or recommended by the manufacturer.

 

k)  Disconnect the machine from the mains before 

checking, cleaning or working on the machine and 
when it is not in use.

 

l)  Always ensure that ventilation openings are kept 

clear of debris.

2) Service

 

a) After use, disconnect the machine from the mains 

and check for damage.

 

b) When not in use store the machine out of reach of 

children. 

 

c) Mains powered trimmers should only be repaired 

by an authorised repairer.

 

d) Use only manufacturer's recommended 

replacement parts and accessories.

3)  Additional grass trimmer safety instructions

 

a) Read the instructions carefully.

 

b) Be familiar with the controls and proper use of 

equipment.

 

c)  Before use check the supply and extension cord 

for signs of damage or ageing.

 

d) If the cord becomes damaged during use, 

disconnect the cord from the supply immediately.
DO NOT TOUCH THE CORD BEFORE 
DISCONNECTING THE SUPPLY.

 

e) Do not use the trimmer, if the cords are damaged 

or worn.

 

f)  WARNING: Cutting elements continue to rotate 

after the motor is switched off.

 

g) Keep extension cords away from cutting elements.

 

h) For safe operation of this appliance it should be 

supplied via a residual current device (RCD) with a 
tripping current of no more than 30mA.

9.2  FLOWER GUARD - FIGS. 10 - 11

FIG.10

FIG.11

FIG.12

FIG.13

9.3  GUIDE WHEEL FOR EDGING - FIGS. 12 - 13

OR

Summary of Contents for GT530B





















Reviews: