page 24 of 28
Foundation
™
for LED Panels
Section 14 -
Attaching LED Panels LED Cabinets
NOTE: All trim brackets and the Bottom Trim Panels MUST be installed
(Section 13)
before installing LED CABINETS
Section 14.1 - Attaching Spring-Loaded Fasteners
1.
Replace the mounting bolts
(pre-installed by LED manufacturer)
in the LED
cabinet with the provided Spring Loaded mounting studs.
Section 14.2 - Attaching LED Panels
1.
Starting in the bottom left corner, insert the four
(4)
Spring-Loaded Mounting studs into the angled slots on the vertical rail as shown.
The head of the studs will engage with the back side of the vertical rail and the spring washer will remain on the front face
(does not fit through the slot)
.
Once the head of all 4 studs are fully inserted, lower the panel into the final location.
FRONT
VIEW
BACK VIEW
LED
CABINET
Mounting Holes
LED PANEL PLACEMENT
OUTER COLUMNS
(Left & Right Sides)
M10 Spring-Loaded
LED Mounting Stud
4 per panel
M10 Spring-Loaded
LED Mounting Stud
4 per panel
SEATED
START
Left Side
NOTE:
All 4 mounting studs must be fully
seated at the bottom of the slot.
