page 19 of 28
Foundation
™
for LED Panels
Section 11 -
Adjusting Verticals
Section 11.1 - Y - Axis Adjustment
Section 11.1.1 - For LED arrays up to 6 panels high - 2 Horizontal Rails
1.
Locate the highest Vertical Rail and shine a laser level line across utilizing the laser level notch.
2.
Use a 5mm hex wrench to raise each Vertical Rail until the are all level.
Please note:
All Vertical Rails must be aligned and level with each other.
Section 11.1.2 - For LED arrays 7 panels or higher - 3 Horizontal Rails
Each Vertical Rail section
(upper and lower)
has its own adjustment set screw.
1.
Locate the highest Vertical Rail and shine a laser level line across utilizing the laser level notch.
2.
Beginning with the Lower Sections, use a 5mm hex wrench to raise each Vertical Rail until they are all level.
3.
Repeat Steps 1 and 2 on the Upper Sections of each Vertical Rail.
Please note:
All Vertical Rails must be aligned and level with each other.
Adjust
Vertical Rails
Until Level with
Laser Line
Adjust
Vertical Rails
Until Level with
Laser Line
LASER LINE
ALIGNMENT
NOTCHES
LASER LINE
ALIGNMENT
NOTCHES
Adjust Set Screw DOWN
to RAISE position of
the each Vertical Rail
LASER LINE
ALIGNMENT
NOTCHES
LASER LINE
ALIGNMENT
NOTCHES
Adjust Set Screw DOWN
to RAISE position of
the each Vertical Rail
Adjust Upper
Vertical Rails
Until Level with
Laser Line
Adjust Lower
Vertical Rails
Until Level with
Laser Line
