5. HEALTH & SAFETY INFORMATION
5.1 GENERAL SAFETY INSTRUCTIONS FOR POWER TOOL USE
When using any type of power tool there are steps that should be taken to make sure that
you, as the user, remain safe.
Common sense and a respect for the tool will help reduce the risk of injury.
Read the instruction manual fully.
Do not attempt any operation until you have read and
understood this manual.
Most important you must know how to safely start and stop this machine, especially in an
emergency.
Keep the work area tidy and clean.
Attempting to clear clutter from around the machine
during use will reduce your concentration. Mess on the floor creates a trip hazard. Any
liquid spilt on the floor could result in you slipping.
Find a suitable location.
If the machine is bench mounted; the location should provide good
natural light or artificial lighting as a replacement. Avoid damp and dust locations as it will
have a negative effect on the its performance.
If the machine is portable; do not expose to rain. In all cases do not operate power tools near
flammable materials.
Beware of electric shock.
Avoid contact with earthed surfaces; because they can conduct
electricity if there is an electrical fault with the power tool. Always protect the power cable
and route it away from danger.
Keep bystanders away.
Children, onlookers and passers-by must be restricted from entering
the work area for their own protection. The barrier must extend a suitable distance from the
tool user.
Unplug and house all power tools that are not in use.
A power tool should never be left
unattended while connected to the power supply. They must be housed in a suitable
location, away locked up and from children.
Do not overload or misuse the tool.
All tools are designed for a purpose and are limited to
what they are capable of doing. Do not attempt to use a power tool (or modify) for an
application it is not designed for. Select a tool appropriate for the size of the job.
Overloading a tool will result in tool failure and user injury: This includes the use of
accessories.
Dress appropriately.
Clothing should be close fitted, with any long hair tired back and
jewellery and neck ties removed as they can cause an entanglement risk, resulting in body
parts being pulled into the machine. Footwear must be fully enclosed and have a nonslip
sole.
6
