8. ASSEMBLING THE ARC WELDER
14
8.3 FITTING THE FEET – FIG. 5
– Position the feet
on the underside of the
machine, as shown in fig.5.
– The two feet contain a slot
that enables
them to be slid onto the bottom of each of the
side panels of the machine.
– Using the 2 screws provided
, secure each foot
to the underside of the machine base.
8.4 ASSEMBLING THE FACEMASK –
FIGS. 6 – 7
– Locate the ridges on facemask handle
into
the corresponding slots on the facemask visor
and gently push-fit in place (fig. 6).
– Fit the facemask lens
into the recess situated
inside the facemask visor
. The lens is held in
place by the 2 clips
.
FIG. 5
FIG. 6
FIG. 7
