4. INTRODUCTION
4.1 SCOPE
AC welding machine suited to light repair and fabrication work.
4.2 SPECIFICATION
Stock no .............................................................................................................................83403
Part no .......................................................................................................................... AW200T
Rated voltage ........................................................................................................... 230/400V~
Rated frequency ................................................................................................................ 50Hz
Rated max. supply current ................................................................................................. 16A
No load voltage .......................................................................................................... 45 – 48 V
Welding current ........................................................................................................ 80 – 200A
Coupling device ........................................................................................................... direct fit
Degree of protection .........................................................................................................IP21S
Cooling ..........................................................................................................................Air (fan)
Max. working temperature .................................................................................................. 40º
Dimensions ................................................................................................. 470 × 270 × 320mm
Weight ............................................................................................................................... 21kg
4.3 HANDLING & STORAGE
Care must be taken when handling and lifting. Dropping this machine will have an effect on
the accuracy and may also result in personal injury. This machine is not a toy and must be
respected.
The environment will have a negative result on its operation if you are not careful. If the air
is damp, components will rust. If the machine is unprotected from dust and debris;
components will become clogged: And if not cleaned and maintained correctly or regularly
the machine will not perform at its best.
5
