Section 4.3 - Ceiling Installation:
1.
Attach Ceiling Brackets to
Mounting Brackets
using the provided hardware
(see figure at right)
.
2.
Secure the Ceiling Brackets to the ceiling using appropriate hardware
(by others)
.
CAUTION:
Product is very heavy:
Installer must provide adequate attachment hardware and anchors as required.
Installer must also ensure that structure is of adequate strength
3.
Ensure that
mounting brackets
are level.
4.
Slide all
Bracket Locks
to the center of the case.
5.
Holding the case by the endcaps, lift it up and over the cleats on the
mounting brackets
(see Fig. 7)
.
Wall Bracket Mounting Channels are shown in Fig. 8 below.
6.
Once the case is settled on the mounting brackets, slide the
Bracket Locks
to the center of each
mounting bracket
(see Fig. 8)
and secure set screw on the lock.
Ceiling Brackets
Secured to Ceiling
Mounting Hardware
(by others)
NOTE: It is the responsibility of the installer
to select mounting hardware appropriate
for the mounting surface
SIDE VIEW
ACUMEN
Ceiling
Mounting
Bracket
CEILING
Figure7-B
Figure 7-A
Slide to lock case to
Bracket
Slide to lock case to
Bracket
Wall Bracket Channels
for Case Mounting
18"
(457mm)
Max. Distance
Optional
Center Bracket
One Ceiling Bracket
Centered
Figure 8
Carriage Bolt
Washer
½” Hex Nut
ACUMEN
Ceiling Bracket Assembly
Ceiling Bracket Assembly
page 5 of 12
Acumen
™
Recharge E & V
