8.3
EYE SHIELD – FIGS.4 - 5
To install the eye shield:
– Remove the cap screw and washer shown in
Fig. 4.
– Install the eye shield with the fastener just
removed.
– Remove the protective covering.
8.4 SPARK TRAP – FIG.6
To install the spark trap:
– Install the spark trap into the slot beneath the
contact wheel.
– Tighten the knob to secure position.
8.5 WORK REST – FIG.7
To install the work rest:
– Remove the two bolts and washers already
installed into the work rest.
– Position the work rest in place and install using
fixings just removed.
– 13 –
8. ASSEMBLY INSTRUCTIONS
FIG.4
FIG.5
FIG.6
FIG.7
