1
FIG.
FIG.2
FIG.3
– 12 –
8. ASSEMBLY INSTRUCTIONS
Note: This machine must be fully assembled
before it can be operated. Before beginning the
assembly process, please make sure you have
read and understood the instructions.
Caution! Some components of this machine are
heavy. Get lifting help to move heavy items to
avoid injury.
8.1 SUPPORT COLUMN (98422
ONLY) – FIGS.1 - 3
The machine is packaged attached to the
rectangular floor base, but a support column is
available separately under Draper Stock No.
98422.
To install the column:
– Remove the four nuts, bolts and washers in the
base to separate from the machine.
– Position the column upside down and attach
the base with the nuts, bolts and washers
removed in the previous step. Then position
right side up.
– Remove the four bolts and washers from the
top of the column.
– Position machine on top of column and attach
using the fasteners removed in previous step.
8.2 INSTALLATION
Before the machine can be used, a suitable
location must be found. The area must be flat, level
and be able to comfortably accommodate the
weight of this machine and any workpieces.
The area must also be well lit and provide
adequate space around the machine.
Areas liable to excess dust, moisture and direct
sunlight should be avoided.
Note: Before first use - follow the initial starting
instruction and remove any anti-rust protection
which have been applied for transportation.
