8. INSTALLATION AND ASSEMBLY
11
8.1 DETERMINE THE PROPER LOCATION FOR THE TYRE CHANGER (FIG.1).
WARNING:
Make sure this machine is used on a dry, oil/grease free, flat, level
CONCRETE
surface capable of supporting the weight of the tyre changer and any additional tools and
equipment.
For safe and ergonomic use of the machine it is advisable to locate the machine a minimum
of 500 mm from the surrounding walls.
– The tyre changer is designed for indoors use only. Do not install or use outdoors, or in
damp or wet locations.
– Make sure to check the desired location for possible obstructions such as a low ceiling,
overhead lines, adequate working area, access ways, exits, etc.
– The tyre changer
MUST
be located in an area free of flammable materials and liquids.
8.2 MOUNT THE TYRE CHANGER ON
A FLOOR SURFACE (FIG.2).
The machine is fitted with special rubber feet for the
dampening of possible vibrations
In order to inflate tyres on the turntable it is essential
to fix the machine to the ground. For this operation
use the holes that were used to fix the machine to the
pallet
$
.
FIG.2
$
