- 4 -
- 21 -
3. GUARANTEE
3.1 GUARANTEE
Draper tools have been carefully tested and inspected before shipment and are guaranteed to be
free from defective materials and workmanship.
Should the tool develop a fault, please return the complete tool to your nearest distributor or
contact:
Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF. England.
Telephone Sales Desk: (023) 8049 4333
or:
Product Helpline (023) 8049 4344.
A proof of purchase must be provided.
If upon inspection it is found that the fault occurring is due to defective materials or workmanship,
repairs will be carried out free of charge. This guarantee period covering parts/labour is 12 months
from the date of purchase except where tools are hired out when the guarantee period is 90 days
from the date of purchase. This guarantee does not apply to normal wear and tear, nor does it
cover any damage caused by misuse, careless or unsafe handling, alterations, accidents, or
repairs attempted or made by any personnel other than the authorised Draper warranty repair
agent.
Note: If the tool is found not to be within the terms of warranty, repairs and carriage charges will be
quoted and made accordingly.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its
terms are not authorised.
Your Draper guarantee is not effective unless you can produce upon request a dated receipt or
invoice to verify your proof of purchase within the guarantee period.
Please note that this guarantee is an additional benefit and does not affect your statutory rights.
Draper Tools Limited.
10. MAINTENANCE & TROUBLESHOOTING
10.1 INSPECTION, MAINTENANCE, AND CLEANING
To guarantee the efficiency and correct functioning of the machine (for all versions) it is essential
to clean it and to conduct periodic routine maintenance. The operations of routine maintenance
must be carried out by the user according to the maker’s instructions given below. Before
proceeding to any cleaning or maintenance operation, remove the plug from the electrical socket!
Mechanical parts
: Keep the moving parts clean and lubricating them with oil or grease. In
particular:
Lubricator: Check and maintain the level of oil in the pneumatic lubricator. The level must not go
outside the min/max indicated. If necessary add air tool oil.
Air filter: Periodically remove the water condensation that forms in the air filter.
Roller: Check that the roller always turns freely. Periodically clean and if necessary lubricate with
oil.
Motor drive belt: Check that the motor belt is at the correct tension and that it does not slip.
