– 13 –
EN
8. Operating Instructions
Important: Before using this product, read and understand
all the safety instructions listed in this manual.
8.1 Unfolding and Folding the Workbench
1. To unfold the workbench:
a. Pull the front and rear legs apart.
b. Press down on the folding braces (7) to lock the
legs in position.
2. To fold the workbench away:
a. Ensure that the crank handles are not in the
downward position so as not to damage or obstruct
the legs when folding.
b. Lift the folding braces (7) upwards to unlock
the legs.
c. Push the front and rear legs together until the
workbench is fully closed.
EN
7. Assembly Instructions
7.5 Attach the Benchtops
7.6 Finishing Touches
Important: The nylon inserts inside the nuts should
be broken when securely tightened. This provides
additional security against the accidental loosening of
bolts during use.
Important: When complete, the folding braces between
the front and rear legs should be on the outside of the
frame and should fold upwards when the workbench is
closed.
1. Place the rear benchtop (H) onto the rear U-brackets
so that the eight small holes align with the brackets
and the notch is on the inside edge.
2. Screw eight M5 x 16mm self-tapping screws (P) up
through the brackets and into the benchtop.
Important: LOOSELY insert all eight screws before
tightening them to ensure that all of the holes align
correctly.
3. Repeat these steps for the front benchtop (G),
keeping the ruled edge towards the crank handles.
13
Fig.
15
Fig.
14
Fig.
8.2 Clamping a Workpiece
Workpieces can be clamped directly between the
benchtop pieces or between the clamp blocks. The
clamp blocks can be repositioned as required to
accommodate workpieces of varying shapes and sizes.
The notches in the benchtop pieces can be used to grip
pipes and tubing.
1. Position the clamp blocks (5) in the appropriate holes
of the benchtop as required.
2. Use the crank handles (2) to separate or bring
together the benchtop pieces as appropriate to grip
the workpiece:
– To separate the benchtop pieces, turn both crank
handles anticlockwise.
– To bring the benchtop pieces together, turn both
crank handles clockwise.
16
Fig.
Important: Adjust both crank handles together to open
or close the benchtop evenly.
The crossbars may be used to store tools.
– 12 –
(H)
(P)
(7)
