background image

5

Introduction to the Operating Instructions

These  Operating  Instructions  are  intended  to  facilitate  your  becoming  acquainted  with  the  machine  and  using  it  in
accordance  with  the  regulations.  The  Operating  Instructions  contain  important  information  on  how  to  use  the
machine  safely,  correctly  and  economically.  Observing  this  information  will  help  increase  the  reliability  and
working  life  of  the  machine.  The  Operating  Instructions  must  always  be  at  hand  when  the  machine  is  being  used.
They  must  be  read  and  observed  by  every  person  dealing  with  the  machine,  whether  operating,  servicing  or
transporting  it.
In addition to the Operating Instructions and the applicable rules of the prevention of accidents valid in the country
of use and on site, the generally recognised rules on working safely and correctly must be observed as well as the
accident  prevention  rules  of  the  relevant  professional  associations.

Important instructions for your personal safety

A) General  safety  instructions

Attention: You are at risk of injuring yourself if you
use the chain saw incorrectly. It is imperative that

you read these Operating Instructions and follow the
instructions given.
Attention:

  Noise  protection  !    Please  observe  the  local

regulations  when  operating  your  chainsaw.

1.

Caution!  :  When  electric  tools  are  being  used,  the
following  basic  safety  measures  must  be  taken  to
protect against electric shock, injury and risk of fire.

2.

Protect  yourself  against  electric  shock.  Avoid  body
contact  with  grounded  elements,  e.g.  pipes,  radiators,
stoves,  refrigerators.

3.

Children  and  young  persons  not  operate  electrical
chainsaws.

4.

The  chain  saw  may  only  be  used  by  persons  who
have  sufficient  experience.

5.

Always  keep  these  Operating  Instructions  together
with the chain saw.

6.

Only lend or give this chain saw to persons who are
familiar with its use. Also give them these Operating
Instructions.

7.  You should always be in a good physical state when

working  with  the  chain  saw.  Work  steadily  and  with
concentration.  Particular  concentration  is  necessary
towards the end of your duty.

8.

Never use the chain saw while under the influence of
alcohol, medication or drugs.

B) Instructions  on  the  use  of  personal  protective

clothing

Working  with  a  chain  saw  requires  special  measures
with  regard  to  protective  equipment  and  clothing  suitable
for protecting your head, hands, feet, legs, eyes and ears.

9.

Wear  close  fitting  clothing  which  cannot  get  caught

10. Always  wear  an  approved  and  tested  safety  helmet.
11. Always  wear  safety  goggles  or  a  face  guard.
12. Always  wear  suitable  protective  gloves.
13. Wear ear protection to avoid damage to your hearing.
14. Wear  safety  boots.
15. We recommend that you wear leg guards.

C)  Instructions on using the chain saw safely
16. Attention! Read the Operating Instructions care-

fully and have yourself instructed in the use of a
chain saw before you use it for the first time.

17. Always  store  your  electric  tools  in  a  safe  place.

Electric tools not being used should be stored in a

      dry, inaccessible or locked place, outside the reach

of  children.

18. Use the cable only for the intended purpose. Never

carry  or  suspend  electric  devices  by  the  cable.  Do
not  use  the  cable  to  pull  the  plug  from  the  socket.
Protect  the  cable  from  heat,  oil  and  sharp  edges.

19. Check  the  extension  cable  regularly  and  replace  it

if  it  gets  worn  or  damaged.  Keep  the  handle  dry
and  free  of  oil  and  grease.

20. Pull  the  plug  from  the  socket  when  replacing  the

saw  chain  or  bar.

21. Do  not  leave  the  tool  key  in  the  ignition.  Check

before  switching  on  that  the  key  and  adjustment
tools are removed.

22. Avoid accidental starting. Do not hold your finger on

the  switch  when  carrying  an  electric  tool  that  is
connected  to  the  power  source.  Ensure  that  the
switch is off when the plug is inserted in the socket.

23. Damaged  switches  have  to  be  replaced  by  a

customer  service  workshop.  Do  not  use  an  electric
tool  if  the  switch  cannot  be  switched  on  or  off.

Illustration and explanation of pictograms

1

Wear  eyes-  and  ear-  protectors!

2

Warning!

3

Read  operation  instructions  before  use

4

Do  not  subject  this  electric  power  tool  to  rain

5

Remove  plug  immediately  if  the  power

6

Attention,  kick-back!

flex  is  damaged  or  cut

7

Hold  tool  with  both  hands!

1

2

3

4

5

6

7

Summary of Contents for 68587











Reviews: