5. HEALTH AND SAFETY INFORMATION
– Release the start and stop device in the case of an interruption of the energy supply;
– Only lubricants recommended by the manufacturer shall be used;
– Release pressure when not in use. Disconnect from air line;
– Impact wrenches are not torque wrenches and are not designed or capable of installing
fasteners to a specified torque. For fasteners requiring a specific torque, install the fastener to
well below the required value then complete the task with a hand torque wrench to avoid
damaging the fastener or workpiece.
– Ensure the anvil ring is correctly maintained and if damaged or missing, is replaced
immediately before work commences. Missing or damaged anvil rings may lead to sockets
detaching from the wrench while rotating at high speed.
– Only use accessories specifically hardened for impact use. Do not use standard chrome type
hand tool sockets as they will shatter and splinter causing injury.
– Do not modify this impact wrench in any way.
– Do not carry or move the tool by the air line.
– When starting or finishing the removal and installation of fasteners there is a risk of crushing
between the tool and the workpiece due to sudden movement or reaction forces.
5.3 RESIDUAL RISK
Warning!
●
Although the safety instructions and operating manuals for our tools contain
extensive instructions of safe working with power tools, every power tool involves a
certain residual risk which can not be completely excluded by safety mechanisms.
Power tools must therefore always be operated with caution!
- 8 -