Draper 67089 User Manual Download Page 5 | Manualshive

Page: 5 / 18

Draper 67089 User Manual Download Page 5

4. INTRODUCTION

4.1 SCOPE

This air impact wrench is designed for removal and installation of threaded fasteners. Any other
use is forbidden.

4.2 SPECIFICATION

Stock No.  ................................................................................................................................. 67089
Part no.  .......................................................................................................................... 5209PRO/G
Square drive anvil size  ...............................................................................................................1/2"
Ultimate torque .......................................................................................................... 678Nm/500lb-ft
Max. operating air pressure ......................................................................................... 90psi (6.2bar)
Average air consumption....................................................................................... 4.0cfm (113L/min)
Free speed (no load) ......................................................................................................... 10,000min
Minimum air line size .................................................................................................................3

⁄

8"ID

Air inlet ................................................................................................................................. 1

⁄

4" BSP

Sound pressure level* ........................................................................................................... 87dB(A)
Sound power level** ............................................................................................................. .98dB(A)
Vibration level ......................................................................................................................... 4.9m/s

2

Weight ................................................................................................................................... 1.44kgs

4.3 HANDLING AND STORAGE

Warning!

●

Wear safety glasses and ear defenders.

*

Continuous A-Weighted Sound Pressure Level at the workstation in accordance to
prEN ISO 15744:1999 and declared according to EN ISO 4871.

** A-Weighted Sound Power Level in accordance to prEN ISO 15744:1999 and

declared according to EN ISO 4871.

- 5 -

«
...
3
4
5
6
7
...
»

Summary of Contents for 67089



















Reviews:

No comments