Warning!
●
Disconnect from the air supply before carrying
out any adjustments, servicing or maintenance.
9.1 TRIGGER SWITCH – FIG. 5
Note:
Before connecting the impact wrench to the
air supply reduce the line pressure according to the
specification.
– Confirm direction of rotation prior to starting. Pull
trigger
to operate the impact wrench.
– Release the trigger to stop the impact wrench.
The anvil and accessory will continue to rotate
briefly after the trigger has been released.
Note:
Before tool operation and work commences, ensure the compressor reservoir is drained of
condensate along with all connected air lines.
Check and drain the air line regulator’s water trap and fill up the lubrication reservoir.
9.2 FORWARD/REVERSE SPEED
SELECTION – FIGS. 6
– The impact wrench has 3 forward speeds and 3
reverse speed. Turn the combined directional
speed switch
to engage the speed
appropriate for the task in hand.
Note:
Disconnect the air supply before carrying out
adjustment, servicing or maintenance.
- 13 -
9. OPERATION AND USE
FIG.5
FIG.6
