17
11. OPERATING THE HEDGE TRIMMING ATTACHMENT
VERTICAL CUTTING [ALONG SIDE] (FIG.10)
The best practice is to cut the front and side of a
hedge first before finishing with the top
– Set the cutting head straight.
– Make large sweeping arcs with the cutting head,
using both sides of the blade to trim material
from the hedge.
Stand back at regular intervals. What 'looks' to be a
straight and level cut from close up will look quite
different from a distance.
VERTICAL CUTTING [AT A DISTANCE] (FIG.11)
If an obstacle prevents you from standing directly
next to the hedge [for example a flower bed] follow
the steps as per vertical cutting but with the cutting
head at a more suitable angle.
HEDGE TOPPING [ABOVE HEAD HEIGHT] (FIG.12)
Although it is possible to cut the top of a tall hedge
in this method, using a safe platform to raise
yourself level with the hedge top is preferred and
will result in a more attractive finish.
– Set the cutting head at 90 degrees.
– Twist the shaft to make the cutting head swing in
an arc across the top of the hedge.
– Working in this position is particularly difficult.
Take regular breaks to avoid strain or injury.
HORIZONTAL CUTTING (FIG.13)
The final stage is to shape the top of the hedge.
– Set the cutting head straight.
– Make level arcs, so as to encourage the trimmings
on to the floor.
Do not attempt to cut a hedge higher than chest
height without using a safe platform.
Warning!
If working on a platform, do not attempt
to stretch or over reach.
When cutting with the blade set straight, tilt the
cutting side of the blades toward the hedge by
approximately 0-10 degrees.
FIG.10
FIG.11
FIG.12
FIG.13
