background image

41 

STATEMENTS AND NOTICES 

Statement of Warranty 

All Dranetz manufactured portable instruments and accessories are 
warranted to the original purchaser against defective material and 
workmanship for a period of three years from the date of invoice. User 
replaceable instrument batteries are warranted for a period of one year 
from the date of invoice. Certain Dranetz branded accessories, such as 
current transformers and other accessories not manufactured by 
Dranetz, are warranted to the original purchaser against defective 
material and workmanship for a period of one year from the date of 
invoice. Warranties for products and accessories sold by, but not 
branded as Dranetz, are covered by their respective manufacturer’s 
warranties and are not warranted by Dranetz. Dranetz will repair or 
replace, at its option, all defective equipment that is returned, freight 
prepaid, during the warranty period. There will be no charge for repair, 
provided there is no evidence that the equipment has been mishandled 
or abused. This warranty shall not apply to any defects resulting from 
improper or inadequate maintenance, buyer-supplied hardware/software 
interfacing, unauthorized modification or misuse of the equipment, 
operation outside of environmental specifications, or improper site 
preparation or maintenance.   

Summary of Contents for HDPQ-DN-MVB













































Reviews: