18
DranTech PMIT User’s Guide
12.2.2 Memory Mode Operation – STORE Menu Function
➭
First set the sampling rate for memory mode operation, and
then start memory mode operation.
The sampling rate can also be changed during memory mode
operation.
➭
First select the desired measuring function and an appropriate
measuring range.
➭
Check the rechargeable battery charge level before starting
long-term measurement recordings, see chapter 14.1 on page
25. Connect the charger if necessary.
Starting Memory Mode Operation with Menu Functions
➭
Open the “Operating Mode” menu (refer to the menu dia-
gram) and select the StorE function.
➭
Now activate the key to open the start menu for memory
mode operation: StArt blinks.
Activate the
key once again in order to start memory mode
operation: REM appears at the display.
➭
Press the key in order to switch to the measuring function.
A new memory block is created when another measuring function
is selected with the rotary switch or the FUNC key. Data storage
then continues automatically. The “SLEEP MODE” is still active,
i.e. the device is switched on and off automatically at sampling
rates of long duration
(see chapter 2).
When memory capacity has been exhausted, MEMO FULL
appears at the display, and an acoustic signal is generated
simultaneously. The signal can be deactivated by pressing any
key.
REM Display
The REM symbol indicates that memory mode operation has
been activated via menu function STORE.
Press the key if you wish to monitor the measured values also
during the memory process.
The “STORE” function cannot be started while the “DATA”
function is activated.
Exiting Memory Mode Operation with Menu Functions
➭
Select the StorE menu.
➭
Activate the key: StOP blinks.
➭
Activate the key once again: the auxiliary displays are
cleared. Memory mode operation has now been deactivated.
➭
Press the key in order to return to the measuring function.
➭
Memory mode operation can also be exited by switching the
instrument off.
12.3 Querying Memory Occupancy – INFO
MEMO/OCCUP
Memory occupancy can be queried from the “InF0” menu. The
main display shows current occupancy as a percentage between
001 and 100%
12.4 Clearing the Memory – MEMO
CLEAr
Attention!
!
This function deletes all measured values from memory.
This function cannot be performed during memory mode;
bUSY
MEMO
is displayed instead of CLEAR.
12.5 Activating the Default Values
Previously entered changes can be undone, and the default
settings can be reactivated. This may be advisable after the
occurrence of software or hardware errors.
➭
Simultaneously press and hold the FUNC, MAN|AUTO and
DATA|CLEAR keys, and switch the instrument on with the
ON |OFFkey.
