5
SYSTEM CONNECTION
Connect the
AUDIO, VIDEO
, and
Scart
output terminals with the corresponding terminals of TV set.
Adjust the direction of the dish according to the antenna signal level display on the screen.
Connect
F
terminal to both ends of the cable, one end to
LNB
of satellite antenna and the other end to
“
SAT IN
” input terminal of this unit.
Please make sure that the
F
terminals are connected well.
Do not tie antenna cable with power line.
POWER ON
n
Plug the machine and press its power switch to keep the “
1
” status, the unit enters its normal
mode
n
Press the
standby
key on the remote controller to the remote receiving window of the machine or
the key on the set, which enters its standby mode and the “
standby
” character appears on the
screen for seconds. Re-press the key, the unit recovers to its normal
n
If the channel has been locked, the lock light lights up
