14
channel name which operation just as above-mentioned about
soft-keyboard
introduction. Light the
Video PID, Audio PID,
and
PCR
instruction strip and press the digital keys to input the
correct value,
Add
: return to the
Edit Satellite
interface and press the
blue key
, the picture shows as:
Press the
OK key
to spring out the
soft-keyboard
to
define the satellite name, finish the definition, input
one-group parameter of
TP frequency, LNB polarization
and Symbol Rate
, press the
OK key
to save the
installation and the new satellite will be added meanwhile.
Check the added satellite in
Select Satellite
menu
interface pls
Return the interface to the
Edit
and light the
Edit
Transponder
menu strip, the image shows
Delete
: press the
▲▼
key to move the cursor up or
down, press the
red key
and the window with “
YES
” and
“
NO
” springs out, press the
red key
to delete it and the
green one
to exit
Press the
green key
to add the “up/ down” symbol on the
end of the transponder parameter strip turn yellow, press
the
▲▼
key to move the strip to the suitable situation
and release
Change
: refer to the relative introduction segment of
Edit Sat
-ellite
Add
: return to the
Edit Transponder
and force down the
blue key
to enter the image:
Press the
digital keys
to finish the input of parameter of
TP frequency, LNB polarization, Symbol Rate,
press
the
OK key
to save the new added transponder and which can
be detected in the interface of
Select Transponder
of
Select Satellite
EDIT TRANSPONDER
