background image

 

17 

TIMER

   

 

Press the 

blue key

 in either non-menu or 

Main Menu

 

interface, the interface enters 

TIMER

 function, the image 

shows as 
The strip on the  top  shows the present date and time 
which are sent by satellite 
Press the 

digital keys

 directly to modify the showing date 

and time, hereinto: 
Input 12 digits is to modify  either the date or the time 
Input 8 digits is to modify the date only 
(All the digits are 0 is useless) 
The 

red key

 is to delete the timer instruction strip, and 

instead, the 

green key

 is to add one. Press the 

▲▼

, +/- 

key to move the cursor up/ down, press the 

yellow

 and 

blue

 keys to adjust the parameter of the timer instruction. 

Thereinto: mod->mode;   

A-> audio  

 

 

GAME   

 
Press the 

GAME

 key in program-watching state to enter 

the game playing status, their three kinds of game to 
provide for entertainment: 

Snake, Gobang, Tetris

 

Use pressing the 

▲▼

 key to select the game strip and 

OK key

 to enter which interface 

 
For example, choose the Tetris: 
 
 
Press the 

▲▼

 key to adjust the game level and the 

highest grade is 7, then press the OK key to enter playing 
interface 
 
Press 

 key to  deform the shape, + key to move the 

shape to the right direction , the  –  key to the left, the

 

key to accelerate the falling and the 

MENU

 key to pause 

the action 

 

 

 
 

Summary of Contents for ESR-D103





















Reviews: