Dragonfly 32 Swing Wing Manual Download Page 3 | Manualshive

Page: 3 / 80

background image

INTRODUCTION

We  are  delighted  to  welcome  you  to  the  family  of  DRAGONFLY  sailors  with  our
warmest congratulations on your new DRAGONFLY.

This manual is meant to help you enjoy sailing and understand the comfort and
safety of your boat. The manual describes the boat, the equipment and includes
maintenance  guidance.  Before  you  and  your  crew  take  off  to  sea,  we  strongly
recommend reading the manual carefully to avoid any mistakes and/or damages.
Make yourself at home onboard your boat before going sailing.

We  keep  improving  our  boats  as  we  want  you  to  benefit  from  new  technology
and  breakthroughs,  new  equipment,  materials  and,  of  course,  our  experience.
Therefore,  the  characteristics  and  information  hereby  provided  are  not  binding
and can be changed without prior notice or updated obligation.

DRAGONFLY is built with more than 50 years of experience in multihulls, and we
feel today that we are delivering a consistent product of high quality and design.
Quorning Boats endeavours to deliver a perfect product. If minor problems should
occur, we kindly ask you to contact your dealer.

Please keep your DRAGONFLY in respectable condition as well at sea as ashore.

We  wish  you,  your  family  and  crew  all  the  best  and  lots  of  fun  with  your
DRAGONFLY 32.

QUORNING BOATS ApS

Jens Quorning

Owner's Manual

–

February 2017 edition

«
1
2
3
4
5
...
»

Summary of Contents for 32 Swing Wing

















































































Reviews:

No comments

Related manuals for 32 Swing Wing

Brand: MACGREGOR Pages: 7

Brand: Bestway Pages: 6

Brand: Sea Pro Pages: 50

Brand: Hobie Pages: 20

Brand: Grady-White Boats Pages: 74

Brand: Pelican Pages: 4

Brand: DE WIT WORKBOATS Pages: 42

Brand: TAKACAT Pages: 4

Brand: BENETEAU Pages: 127

Brand: Walker Bay Pages: 4

Brand: UIM Pages: 17

MERRY FISHER 725 HB

Brand: Jeanneau Pages: 102

Brand: Quicksilver Pages: 49

Brand: Zodiac Pages: 302

Brand: Quicksilver Pages: 47

Brand: World Cat Pages: 109

Brand: Carp Design Pages: 5

Brand: CarpMadness Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands