background image

strona: 7 / 12

3.

Instructions of shipment, unpacking and installation

3.1.

Delivery

1x awning Type: Veranda EVO,

Brackets in an amount: 4 or 5 (for version with an additional support Fig. 2 pos. Z),

1x Operating and Maintenance Instructions, Warranty,

1x E-Connections and settings (only for motor drive),

1x User manual for Weather Automatic (only for Awnings with Sun - Wind Automatic),

1x Remote Control Manual (only for remote controlled Awnings),

1x Handle (only for Awnings with manual drive or with motor drive Type: NHK),

1x Test run or programming cable (only by special order),

1x Handing over protocol/Waranty.

3.2.

General remarks

Note

The awning is supplied without mounting material. The components of the awning
meet the applicable rules and technology. Changes in the design are allowed only with
permission of DRAGON, Korgul, Prochowski Sp J. Changes in the design of the
awning without the written consent of the manufacturer could void the warranty.

Note

Installation of awning, adjustment and checking of proper operation can be performed
only by trained installation teams. Installation team is responsible for correct
installation (with the appropriate anchors for the basis) readjustment and test run of
the awning.

3.3.

Service, shipment, unpacking and storage

The awning is so packed that it can be delivered without damage. During loading and unloading of the
awning be sure it was not placed on an uneven surface. We recommend carrying this awning by two people.
Upon unpacking the product you keep a special care not to damage the fabric.

If the awning will be stored for a long time, before installing we recommend:

Store the awning in the shade.

Protect the awning from moisture and high temperature difference.

Protect an awning from shock and/or load.

3.4.

Installation of the awnings frame

The installation must be in accordance with the requirements of safety, particular in health and safety
regulations. Use scaffolding or ladders that are in good condition. If the awning is not installed on the ground
floor but on the upper floors, it is recommended to mark up and protect the area below. Do not make
changes in the structure of the awning.

3.5.

Qualifications of the installation team

Observe safety rules.

Ability to use of ladders and scaffolds.

Ensure transport and storage of the awning.

Experience in the use of tools and equipment.

Appropriate certificate of approval and use for fixing materials in construction.

Installation training at Dragon company (recommended).

Training the end user before using the awning.

Pass manuals and warranty on the end-user (Handing over protocol/Waranty).

Summary of Contents for Veranda EVO













Reviews: