Safety-related information
|
en
Instructions for use
|
Dräger X-node
13
1
Safety-related information
1.1
Basic safety information
– Before using this product, carefully read these instructions for use and those
of the associated products.
– Strictly follow the instructions for use. The user must fully understand and
strictly observe the instructions. Use the product only for the purposes
specified in the intended use section of this document.
– Do not dispose of the instructions for use. Ensure that they are retained and
appropriately used by the product user.
– Comply with all local and national rules and regulations associated with this
product.
– Maintenance work may only be carried out by Dräger or by qualified
personnel trained by Dräger MSI. Otherwise, Dräger MSI will reject any
responsibility for the product working properly after repair and for the validity
of approvals.
– Use only genuine Dräger spare parts and accessories for maintenance.
Otherwise, the functional integrity of the product may be impaired.
– Do not use faulty or incomplete products. Do not modify the product.
– Notify Dräger in the event of any component fault or failure.
– Only store the product at room temperature and without exposure to
solvents, plasticisers, exhaust gases or combustibles.
– Do not use the product in a potentially explosive atmosphere.
– Do not open rechargeable batteries or throw them into a fire.
2
Conventions in this document
2.1
Meaning of the warning notices
The following warning notices are used in this document to alert the user to
potential hazards. The meanings of the warning notices are defined as follows:
2.2
Trademarks
3
Description
3.1
Product overview
Warning sign Signal word
Consequences of non-compliance
CAUTION
Indicates a potentially hazardous situa
-
tion. If not avoided, it could result in
physical injury. It may also be used to
alert against unsafe practices.
Trademark
Owner of trademark
DrägerSensor
®
Dräger
Bluetooth
®
Bluetooth SIG, Inc.
52533
1
Mounting lug
2
Status LED
3
Housing of the Dräger X-node 1 sensing head
1
2
4
3
5
6
