Instruction Manual Dräger P7-TDX
9
5. Selecting and entering customer data
Using the PC software, there is the option of creating a cus-
tomer number, customer name and customer data and
transmitting this information to the measuring device.
If customer data is stored in the device, this function can be
used to select a customer and store data measurements un-
der this customer’s name.
If there is no customer data stored for the customer, it can be
entered using this function.
The context menu is opened with (
lll
).
No customer is selected using
(Without)
.
New customer data can be created using
(New)
.
The highlighted customer number and, if available,
corresponding data are shown using (
Edit
).
This data can be edited using
(SELECT)
and accepted using
(END)
.
The following can be stored: Customer number, name, system type, installation location,
system number, street, post code, city, customer name, customer’s street, customer’s post
code, customer’s city, customer’s phone number.
A customer name can be searched for in the data stored using
(Search)
.
The customer number shown can be accepted using (
SELECT
).
The accepted customer number applies to all subsequent measurements until the device
is switched off or another number is selected.
The entire customer dataset can be deleted using
(Delete)
. Individual customer datasets
can only be deleted if this function is activated and there are no measurements stored on
the device.
